Back to top
Send SMS

Product Showcase

VALVES

Product Image (AV-51)

Bronze Horizontal Lift Check Valve (Screwed Ends)

Screwed in Cover, Integral Seat, Guided Disc, Screwed Female Ends. Screwed Female BSP Threads to BS 21 Test Pressure Body : 300 Psig (Hyd.) Seat : 150 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-01)

Bronze Union Bonnet Globe Valve No. 9 (Screwed Ends)

Screwed on Bonnet, Inside Screw, Rising Stem, S.S. 410 Working Part, Renewable S.S. Trim with Back Seat Arrangement Handwheel Operated. Test Pressure Body : 600 Psig (Hyd.) Seat & Back Seat : 300 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-07)

Bronze Horizontal Lift Check Valve (Screwed Ends)

Screwed in cover, With Ptfe or Rubber disc. Screwed female BSP parallel threads to BS-21 Test Pressure Body : 300 Psig (Hyd.) Seat & Back Seat : 150 Psig (Hyd.) Seat : 150Psig (Air) Testing Standard : BS EN 12266 Part-1

Product Image (AV-12)

Bronze Thermodynamic Steam Trap (Screwed Ends)

With S.S. Trim and Strainer, Fine Finish Casting, Screen is guided in the body, Corrosion resistant screen is used. Female BSP parallel threads to BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. Steam working pressure – 250 Psig at 225ºC

Product Image (AV-14)

Bronze Y-Type Strainer (Screwed Ends)

S.S. Screen with 1mm Dia. Perforations, Fine Finish Casting to reduce pressure drop, Screen is guided in the body, Corrosion resistant screen is used, Large ratio clearance between the strainer and body is designed to achieve minimum pressure drop. Screwed female BSP parallel threads to BS 21 Test Pressure Body : 300 Psi g (Hyd.) Max. Working Pressure : 150 Psi g (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-16)

Bronze Gland Packed Water Level Gauge Cock

Gland Packed Screwed Male Inlet BSP Parallel Threads (BS-21) Test Pressure Body : 300 Psi g (Hyd.) Max. working pressure : 150 Psig at 225ºC (Steam)

Product Image (AV-27)

Bronze Union Bonnet Globe Valve No. 9 (Screwed Ends)

Screwed in cover with 13% Cr. Stainless Steel, Renewable Working Parts, Screwed Female Ends Screwed female BSP parallel threads to BS 21 Test Pressure Body : 500 Psig (Hyd.) Seat : 250 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-31)

Bronze Sight Flow Indicators

Single window with toughened glass Screwed female ends to BS 21 Test Pressure Body : 300 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-34)

Bronze Horizontal Lift Check Valve (Screwed Ends)

Screwed on bonnet, Renewable seat. Screwed female BSP parallel threads to BS 21 Test Pressure Body : 600 Psig (Hyd.) Seat : 300 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-35)

Bronze Globe Steam Stop Valve

Screwed in Bonnet, Inside Screw, Rising Stem, S.S. Trim with backseat arrangement, Handwheel operated. Screwed female BSP parallel threads to BS 21 Test Pressure Body : 500 Psig (Hyd.) Seat : 250 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-36)

Bronze Pressure Relief Valve

Straight Pattern, Open Discharge. Screwed Male Inlet BSP parallel threads to BS 21 Test Pressure Body: 300 Psig (Hyd.) Max. set pressure : 150 Psig (Steam) at 225°C

Product Image (AV-37)

Gun Metal Pressure Relief Valve

Angle Pattern, Spring Loaded, Enclosed Discharge. Screwed male inlet & screwed female outlet BSP parallel threads to BS 21 Test Pressure Body : 300 Psig (Hyd.) Max. set pressure : 150 Psig (Steam) at 225°C

Product Image (AV-40)

Bronze Globe Valve (Screwed Ends)

Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat Screwed Female BSP Parallel Threads to BS 21 Test Pressure Body – 300 Psig (Hyd.) Seat – 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-71)

Bronze Gate Valve (Flanged Ends)

Screwed in bonnet, Inside screw, Non-Rising stem Flanged ends to BS 0 Table-D Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-75)

Gun Metal Gate Valve – Pegular Type (Pegular Type), PN 16

Screwed in bonnet, Inside screw, Non-Rising stem, Integral Seat, Solid Wedge Screwed female BSP parallel threads as per BS 21 Test Pressure Body : 350 Psig (Hyd.) Seat : 260 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-79)

Bronze Vertical Lift Check Valve

Spring loaded, Vertical type, Integral seat Screwed female BSP parallel threads as per BS 21 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.), 80 Psig (Air) Testing Standard : MSS SP-80

Product Image (AV-80)

Gun Metal Vertical Lift Check Valve (Two Piece Design), Pn 20

Screwed Female BSP Parallel Threads BS-21 Test Pressure Body – 450 Psig (Hyd.) Seat – 320 Psig (Hyd.)

Product Image (AV-86)

Bronze Foot Valve, Pn 20

Vertical lift, Rubber seat with metallic strainer, Integral seat, Cu-Alloy trim Screwed female NPT threads as per ASME B1.20.1 Test Pressure Body : 435 Psig (Hyd.) Seat : 320 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-90)

Bronze Foot Valve (Hole Type), Pn 20

Bronze foot valve Vertical Lift type Integral Metallic Disc with Metallic Strainer. Screwed Female BSP Parallel Threads BS 21 Test Pressure Body – 435 Psig (Hyd.) Seat – 320 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-92)

Gun Metal Globe Valve Mixed End

Screwed in Bonnet, Inside Screw, Rising Steam. Inlet Flange to BS-10 Table-D & Outlet screwed Female ends to BS-21 Test Pressure Body : 300 Psig(Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-92A)

Gun Metal Gate Valve, Mixed End

Screwed in Bonnet, Inside Screw,Non Rising Steam with Open Shut Indicator & Locking Arrangement. One Side Flange end to BS 10 Table-D, Other Side end BSP Parallel threads to BS 21 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-93)

Bronze Gate Valve (Flanged Ends), Pn 10

Screwed in bonnet, Inside screw, Non-Rising stem, With locking arrangement & position indicator. Flanged ends as per BS-10, Table-D Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-94)

Bronze Globe Valve, Pn 10

Screwed in Bonnet, Inside Screw, Rising Stem, With locking arrangement & position Indicator. Flanges as per BS 10 Table ‘D’ (Undrilled) Test Pressure Body – 300 Psig (Hyd.) Seat – 200 Psig (Hyd.)

Product Image (AV-96A)

Cast Iron Butterfly Valve Wafer Type, Class-125

Wafer Type, Without Lugs, Renewable Linear Seat. Suitable for Insertion between Flanges as per ANSI B 16.1 Cl-125, DIN ND-10 & BS-10 Table’E’ Product Standard : IS-13095 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-96B)

Cast Iron Butterfly Valve, Class-125

Wafer Type, Without Lugs, Renewable Liner, Suitable for Insertion between Flanges as per ANSI B 16.1 CL-125, DIN ND-10 & BS-10 Table’E’ Product Standard : IS-13095 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-96C)

C.c.s. Butterfly Valve Wafer Type, Class-125

Wafer Type, Without Lugs, Renewable Linear Seat. Suitable for Insertion between Flanges as per ANSI B 16.1 Cl-125, DIN ND-10 & BS-10 Table’E’ Product Standard : BSEN-593 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-96E)

C.i. Butterfly Valve Wafer Type, Pn-10

Wafer Type, Without Lugs, Integrally Moulded Linear Seat Suitable for Insertion between Flanges as per ANSI B 16.1 Cl-125, DIN ND-10 & BS-10 Table’E’ Product Standard : IS-13095 Test Pressure Body : 230 Psi g (Hyd.) Seat : 150 Psi g (Hyd.)

Product Image (AV-97)

S.g. Iron Wafer Type Flap Non-return Valve, Pn 16

Non-Return valve, With swing type disc Suitable for insertion between Flanges as per ANSI B16.1 CL-125, DIN ND-10 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-101)

Bronze Vertical Lift Check Valve, Class-1

Spring loaded, Vertical Lift, Integral Seat, with Metallic or Rubber facing disc. Screwed Female Threads to IS – 554 (Parallel) Product Standard : IS-778 Test Pressure Body – 1.5 MPa (Hyd.) Seat – 1.0 MPa (Hyd.) Max. Working Pressure : 1.0 MPa (Hyd.) Max. Working Temperature : upto to 45°C Testing Standard : IS-778

Product Image (AV-102)

Bronze Gate Valve (Screwed Ends), Class-1

Screwed in Bonnet, Inside Screw, Non Rising Stem, Integral Seat, Handwheel operated. Screwed female parallel threads to IS-554 Product Standard : IS-778 Test Pressure Body – 1.5 MPa (Hyd.) Seat – 1.0 MPa (Hyd.) Max. Working Pressure : 1.0 MPa (Hyd.) Max. Working Temp. : Upto 45°C Testing Standard : IS-778

Product Image (AV-105)

Bronze Globe Valve (Screwed Ends) Class-1

Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat, Screwed Ends Product Standard : IS-778 Test Pressure Body – 1.5 MPa (Hyd.) Seat – 1.0 MPa (Hyd.) Max. Working Pressure : 1.0 MPa (Hyd.) Max. Working Temp. : Upto 45°C Testing Standard : IS-778

Product Image (AV-106)

Gun Metal Horizontal Lift Check Valve (Screwed Ends), Class 1

Screwed in cover, Guided disc Screwed female parallel threads as per IS 554 Product Standard : IS-778 Test Pressure Body : 1.5 MPa (Hyd.) Seat : 1.0 MPa (Hyd.) Max. Working Pressure : 1.0 MPa (Hyd.) Max. Working Temp. : Upto 45°C Testing Standard : IS-778

Product Image (AV-117)

Cast Iron Sluice Valve, Pn 1.0

Bolted Bonnet, Inside Screw, Non-Rising Stem As per IS 14846, Table-2 PN 1.0 Flanged as per IS 1538 (Drilled), Table-4 Test Pressure Body – 1.5 MPa (Hyd.) Seat – 1.0 MPa (Hyd.)

Product Image (AV-117A)

Cast Iron Sluice Valve (Flanged Ends), Pn 1.6

Bolted Bonnet, Inside Screw, Non-Rising stem as per IS 14846, Table-3, PN-1.6 Flanged ends as per IS-1538 (Drilled), Table-5 Product Standard : IS-14846 Test Pressure Body : 2.4 MPa (Hyd.) Seat : 1.6 MPa (Hyd.)

Product Image (AV-118)

Cast Iron Gate Valve (Flanged Ends), Pn 1.6

oke Type, Outside Screw, Rising Stem Flanges as per IS-1538 Product Standard : BSEN 1171 Test Pressure Body : 1.5 MPa (Hyd.) Seat : 1.0 MPa (Hyd.) Testing Standard : BESN 12266 Part-1

Product Image (AV-118A)

Cast Iron Gate Valve (Flanged Ends), Pn 1.6

Yoke Type, Outside Screw, Rising Stem Flanged ends as per IS-1538 Product Standard : BSEN-1171 Test Pressure Body – 2.4 MPa (Hyd.) Seat – 1.6 MPa (Hyd.) Testing Standard : BESN-12266 Part-1

Product Image (AV-119)

Cast Iron Reflex Valve (Non-Return), PN 1.0

Bolted Cover, Renewable Seat & Disc Flanged as per IS-1538 Table-4 Product Standard : IS-5312 Part-1 Test Pressure Body – 1.5 MPa (Hyd.) Seat – 1.0 MPa (Hyd.)

Product Image (AV-119A)

Cast Iron Reflux (Non-Return) Valve (Flanged Ends), PN 1.6

Bolted Cover, Renewable disc & seat ring Flanged as per IS 1538 (Drilled) Table-4, PN-1.6 Product Standard : IS 5312 (Part 1) Test Pressure Body : 2.4 MPa (Hyd.) Seat : 1.6 MPa (Hyd.)

Product Image (AV-131)

Cast Iron Dual Plate Check Valve, Class 125

Wafer type, Spring loaded, Resilient seated (EPDM/Nitrile) Clamping between flanges as per ASME ANSI B 16.1, Class 125 Product Standard : API-594 Test Pressure Body : 20.7 Bar (Hyd.) Seat : 15.2 Bar (Hyd.) Testing Standard : API-598

Product Image (AV-133)

Cast Iron Y-Type Strainer (Flanged Ends)

With Stainless Steel perforated sheet screen Flanges as per BS-10 Table ‘D’ FF (Drilled) Test Pressure Body : 15 kg/cm2(Hyd.) Max. working Pressure : 10 kg/cm2(Hyd.)

Product Image (AV-134)

Cast Iron Y-Type Strainer, Screwed Ends, PN-10

“Y” Type, SS Trim Screwed Female BSP Threads(BS-21) Test Pressure Tested to 20kg/cm2g (Hyd.)

Product Image (AV-201)

Bronze Globe Steam Stop Valve (Screwed Ends)

Screwed in Bonnet, Inside Screw, Rising Stem, Screwed Ends, Back Seat Arrangement, Handwheel Operated, S.S. Seat & Disc Test Pressure Body : 35 kg/cm2g (Hyd.) Max. Steam working pressure : 17.5 kg/cm Max. Working Temp. : 225°C

Product Image (AV-221)

Bronze Parallel Slide Blow Off Valve (Flanged Ends)

Rack and Pinion Operated with Seat, Supplied with Operating Key Flanged ends to BS 10, Table-H Test Pressure Body : 500 Psig (Hyd.) Working Pressure : 250 Psig (Steam) Max. Working Temp. : 225°C

Product Image (AV-222)

Bronze Fusible Plug (Two Piece Design)

Two Piece Design Screwed Male BSP Taper Threads BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. Steam working pressure : 250 Psig Max. Working Temp. : 225°C

Product Image (AV-223)

Bronze Fusible Plug (One Piece Design)

One Piece design Screwed Male BSP Taper Threads (BS-21) Test Pressure Body : 500 Psig (Hyd.) Max. Steam Working Pressure : 250 Psig Max. Working Temp. : 250°C

Product Image (AV-229)

Bronze Pressure Reducing Valve Diaphragm Type

Spring Loaded, Outlet Pressure Range Available 5/60, 20/80 & 40/125 PSIG, Cu-Alloy Trim Screwed Female BSP Taper Threads BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. Working Pressure : 250 Psig

Product Image (AV-230)

Bronze Spring Loaded Safety Valve (Right Angle)

Spring Loaded, Enclosed discharge Inlet Screwed male BSP taper threads as per BS 21 Test Pressure Body : 300 Psig (Hyd.) Max. Set Pressure : 150 Psig Max. Working Temp. : 220°C

Product Image (AV-230A)

Bronze Spring Loaded Safety Valve (Angle Type) (Flanged Ends)

Enclosed discharge Flanges as per BS-10, Table-F (Undrilled) Test Pressure Body : 300 Psi g (Hyd.) Max. Set Pressure : 150 Psi g Max. Working Temp. : 220°C

Product Image (AV-234)

Bronze Pop Type Right Angle Safety Valve (Enclosed Discharge)

Spring Loaded, Enclosed Discharge Inlet Screwed Male BSP Taper Threads BS 21, Outlet Screwed Female BSP Parallel Threads BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. set pressure : 250 Psig Max. working temp. : 220°C

Product Image (AV-239)

Bronze Inspector’s Test Gauge Cock (Screwed Ends)

With Bend threaded M20 x 1.5 connection for inspector’s gauge Test Pressure Body : 500 Psig (Hyd.) Max. BOP Working Pressure : 250 Psig (Steam) Max. Working Temp. : 220°C

Product Image (AV-241)

Bronze Pressure Gauge Cock

Fitted with Pressure Gauge Coupling Nut & Tail Pipe, Screwed Female Ends Test Pressure Body : 500 Psig (Hyd.) Max. BOP Working Pressure : 250 Psig (Steam) Max. Working Temp. : 220°C

Product Image (AV-242)

Bronze Fusible Plug (Loco Type)

Test Pressure Body : 500 Psig (Hyd.) Max. BOP Working Pressure : 250 Psig

Product Image (AV-251)

Cast Iron Globe Steam Stop Valve, PN 16

Bolted Bonnet, Yoke Type, Outside Screw, Rising Stem Flanges as per BSEN 1092-2:97 PN 16 Product Specification : BSEN 13789:10 Testing Standard : BS EN 12266 Part-1

Product Image (AV-251A)

C.I. Globe Steam Stop Valve, PN-10

Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem with Backseat Arrangement, Renewable Seat & Disc, S.S. Trim Flanged as per BSEN 1092-2 PN-10 Test Pressure Body : 16kg/cm2 (230 Psi g) Hyd. Seat : 10kg/cm2 (159 Psi g) Hyd. NOTE : S.G. Iron material available on customer request.

Product Image (AV-252)

C.I. Junction Steam Stop Valve, PN 16

Bolted Bonnet, Outside Screw & Yoke Type Flanges as per BSEN 1092-2 (PN 16) Test Pressure Body : 24 kg/cm2g (348 Psig) Hyd. Seat : 16 kg/cm2g (255 Psig) Hyd. Max. Working Temp. : 220°C

Product Image (AV-253)

Cast Iron Horizontal Lift Check Valve, PN 16

Bolted Cover Flanged Ends as per BSEN 1092-2, (PN 16) Product Standard : BSEN 13789 Testing Standard : BS EN 12266 Part-1

Product Image (AV-253A)

C.I. Horizontal Lift Check Valve, PN-10

Bolted Cover, Renewable Seat & Disc, SS Trim Flanged Ends as per BSEN 1092-2 (PN-10) Test Pressure Body : 16kg/cm2 (230 Psi g) Hyd. Seat : 10kg/cm2 (142 Psi g) Hyd

Product Image (AV-256)

Cast Iron Y-Type Strainer (Flanged Ends)

‘Y’ Type Strainer with Stainless Steel, Perforated Sheet Screen Flanges as per BS-10 Table ‘F’ Test Pressure Body : 300 Psig (Hyd.) Max. Steam working pressure : 150 Psig Max. Working Temp. : 220°C

Product Image (AV-260)

Cast Iron Vertical Inverted Bucket Type Steam Trap

With renewable Stainless Steel working parts Screwed Female BSP Parallel Threads as per BS-21 Test Pressure Body : 300 Psig (Hyd.) Working pressure suitable saturated steam upto 150 Psig

Product Image (AV-261)

Cast Iron Spring Loaded Single Post High Lift Safety Valve

Inlet Flanged to BS-10 Table ‘F’ FF (Undrilled) Outlet Flanged to BS-10 Table ‘D’ FF (Undrilled) Test Pressure Body Test Pressure : 300 Psig (Hyd.) Max. set pressure : 150 Psig (Steam) Working Temp. : 220°C

Product Image (AV-262)

Cast Iron Double Post Safety Valve

High Lift, Spring Loaded with Stainless Steel Seat, Stainless Steel Stem Inlet Flanged to BS-10 Table ‘F’ FF (Undrilled), Outlet Flanged to BS-10 Table ‘D’ FF (Undrilled) Test Pressure Body : 300 Psig (Hyd.) Max. set Pressure : 150 Psig (Steam) Max. Working Temp. : 220°C

Product Image (AV-263)

Cast Iron Pilot Operated Pressure Reducing Valve

With Stainless Steel working part, Renewable Seat Flanged Ends as per BS-10, Table F Test Pressure Body : 300 Psig (Hyd.) Max working pressure : 150 Psig (Steam) Max. working temp. : 220°C

Product Image (AV-264)

Cast Iron Moisture Seprator

Horizontal Type Flanges as per BS-10 Table ‘F’ FF (Undrilled) Test Pressure Body : 300 Psig Hyd. Max. B.O.P. : 150 Psig (Steam) Max. Working Temp. : 220°C

Product Image (AV-269)

Cast Iron Ball Float Steam Trap Valve

Horizontal Type, Side Inlet Side Outlet, SS working parts Screwed Female BSP Parallel Threads to (BS-21) Test Pressure Body : 300 Psig (Hyd.) Steam : 150 Psig Max. Working Pressure : 150 Psig Max. Working Temp. : 220°C

Product Image (AV-270)

Stainless Steel Thermo Dynamic Steam Trap

Screwed Ends Test Pressure Body : 900 Psi g (Hyd.), 450 Psi g (Steam) Max. Service Temp. : 425°C

Product Image (AV-276)

C.C.S. Globe Steam Stop Valve, PN 40

Bolted Bonnet, Yoke Type, Outside Screw, Rising Stem, Stainless Steel Trim with Back Arrangement Conforming BS 5160 / DIN 2401 Flanged Ends as per BSEN 1092-1, PN 40 Product Standard : BSEN-13709:02 (BS-5160) Test Pressure Body : 60 Bar (Hyd.) Seat : 40 Bar (Hyd.) Max. Working Temp. : 400°C Testing Standard : BSEN-12266 Part-1

Product Image (AV-278)

C.C.S. Parallel Slide Blow Off Valve

Bolted Bonnet, Rack and Pinion Operated Flanged Ends as per BS-10 Table ‘J’ FF (Undrilled) Test Pressure Body : 700 Psi g (Hyd.) Max. B.O.P. : 350 Psi g at 400°C

Product Image (AV-279)

C.C.S. Y-Type Strainer

Flanged End as per BS-10 Table ‘J’ FF (Undrilled) Test Pressure Body : 700 Psig (Hyd.) Max. Working Pressure : 350 Psig (Steam) Max. Working Temp. : Upto 400°C

Product Image (AV-281)

C.C.S. Sleeve Packed Water Level Gauge

Cast Steel Sleeve Packed water level gaueg, Flanged with Automatic Shut Deice in the water aram available for left hand or right hand mounting Test Pressure Body : 700 Psig Max. B.O.P. : 350 Psig (Steam) Max. Working Temp. : Upto 400°C

Product Image (AV-282)

C.C.S. Accessible Feed Check Valve (Angle Type)

Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem, SS Trim with Back Seat Arrangement Flanges as per BS-10 Table ‘J’ FF (Undrilled) Test Pressure Body : 700 Psig (Hyd.) Max. B.O.P. : 350 Psig Max. Working Temp. : 400°C

Product Image (AV-283)

C.C.S. Single Post Hi-Lift Safety Valve

High Lift with Stainless Steel Steam, Spring Loaded, Right Angle Pattern, High Lift, Renewable Seat & Disc Inlet Flange to BS-10 Table-H F/F (Undrilled), Outlet Flanged to BS-10 Table-D FF (Undrilled) Test Pressure Body : 500 Psi g (Hyd.) Max. Set Pressure : 250 Psi g Max. Working Temp. : 400°C

Product Image (AV-284)

Cast Steel Double Post Safety Valve

High Life, Spring Loaded with S.S. Seat, S.S. Stem Inlet Flange to BS-10 Table ‘H’ FF (Undrilled), Outlet Flanged to BS-10 Table-D (Undrilled) Test Pressure Body : 500 Psig (Hyd.) Max. Working Pressure : 250 Psig (Steam) Max. Working Temp. : 400°C

Product Image (AV-285)

Cast Carbon Steel Full-Lift Safety Valve (Flanged Ends)

Right Angle Pattern, Spring Loaded, Full Lift, Renewable Seat & Disc, With SS working part Inlet Flange to BS-10 Table ‘H’ FF (Undrilled), Outlet Flanged to BS-10 Table ‘D’ FF (Undrilled) Test Pressure Body : 500 Psig (Hyd.) Max. Set Pressure : 250 Psig Max. Working Temp. : 400°C

Product Image (AV-285A)

Cast Carbon Steel Spring Loaded Full-Lift Safety Valve

Spring Loaded, Full Lift, Renewable Seat & Disc, SS Trim Inlet Flanged to ASME B16.5 Class-300 Test Pressure Body : 700 Psi g (Hyd.) Set Pressure : Max. 350 Psi g

Product Image (AV-303)

F.c.s. (A105) Globe Valve, Class-800

Reduced Bore, Bolted Bonnet, O/S & Yoke Type, Rising Stem, Renewable Seat & Plug Type Disc, SS Trim Screwed Female NPT Threads as per ASME B1.20.1 . Product Standard : API-602/ BSEN-15761 Test Pressure Body : 207 Bar (Hyd.) Seat : 152 Bar (Hyd.) Testing Standard : API-598/ BSEN-12266-1

Product Image (AV-73)

Bronze Gate Valve (Flanged Ends)

Screwed in bonnet, Inside screw, Non-Rising stem Flanged ends to BS 0 Table-D Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-41)

Bronze Union Bonnet Globe Valve No. 9 (Flanged Ends)

Screwed on Bonnet, Inside Screw, Rising Stem, S.S. 410 Working Part, Renewable S.S. Trim with Back Seat Arrangement, Handwheel Operated. Flanged ends as per BS-10 Table-F Test Pressure Body : 600 Psig (Hyd.) Seat & Back Seat : 300 Psig (Hyd.) Steam Working Pressure : 150 Psig Testing Standard : BS EN 12266 Part-1

Product Image (AV-277)

C.C.S. Horizontal Lift Check Valve (Flanged Ends )

Flanged End as per BSEN 1092-1, PN-40, RF Product Standard : BS-13709 (BS-5160) Test Pressure Body : 60 Bar (Hyd.) Seat : 40 Bar (Hyd.) Max. Working Temp. : 400°C Testing Standard : BS-12266, Part-1

Product Image (AV-501)

Gun Metal Ball Valve, PN-20

Two Piece Design, Full Bore, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS Trim Screwed Female BSP Parallel Threads (BS-21) Test Pressure Body – 500 Psi g (Hyd.) Seat – 250 Psi g (Hyd.), 150 Psi g (Steam)

Product Image (AV-502)

Gun Metal Ball Valve, PN-16

Two Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS Trim Flanged End to BS-10 Table ‘D’ (Undrilled) Test Pressure Body – 348 Psi g (Hyd.) Seat – 255 Psi g (Hyd.), 150 Psi g (Steam)

Product Image (AV-503)

Cast Iron Ball Valve, Class-125

Two Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS Trim Screwed Female Parallel Threads as per IS-554 Product Standard : IS-9890 Test Pressure Body – 300 Psi g (Hyd.) Seat – 220 Psi g (Hyd.)

Product Image (AV-504)

Cast Iron Ball Valve, Flanged Ends

Three Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS Trim Flanged End to BS-10 Table ‘F’ (Undrilled) Test Pressure Body – 300 Psi g (Hyd.) Seat – 200 Psi g (Hyd.) Seat – 150 Psi g (Steam)

Product Image (AV-505)

Forged Brass Ball Valve

Two Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat Screwed Female BSP Parallel Threads (BS-21) Test Pressure Body – 550 Psi g (Hyd.) Seat – 400 Psi g (Hyd.), 100 Psi g (Steam)

Product Image (AV-506)

Gun Metal Ball Valve with Strainer Screwed Ends, PN-20

Full Bore, Two Piece Design, Renewable Seat, SS Trim, Mix End Inlet Screwed Female & Outlet Screwed Male BSP Parallel Threads (BS-21) Test Pressure Body – 500 Psi g (Hyd.) Seat – 250 Psi g (Hyd.) 100 Psi g (Air)

Product Image (AV-507)

C.S.S. Investment Casting Ball Valve

Two Piece Design, Full Bore, Renewable Seat, SS 304 Trim Screwed Female Ends to BSP/BSPT/NPT/ Socket welded ends to ASME B16.11 Test Pressure Seat – 700 Psi g (Hyd.) Seat – 150 Psi g (Steam)

Product Image (AV-508)

C.S.S. Investment Casting Ball Valve

Two Piece Design, Full Bore, Renewable Seat, SS 316 Trim Screwed Female Ends to BSP/BSPT/NPT/Socket welded ends to ASME B16.11 Test Pressure Seat – 700 Psi g (Hyd.) Seat – 150 Psi g (Steam)

Product Image (AV-509)

C.S.S. Investment Casting Ball Valve, Class-150

Two Piece Design, Full Bore, Lever Operated (Blow Out Proof Stem), Renewable Seat, SS Trim Flanges as per ANSI B16.5 Class-150 (Drilled) Product Specification : BS-17292/ API-6D Test Pressure Body – 30 Bar (Hyd.) Seat – 22 Bar (Hyd.) Testing Standard : API-598/ BSEN-12266-1

Product Image (AV-510)

C.S.S. Investment Casting Ball Valve, Class-150

Three Piece Design, Full Bore, Renewable Seat, SS 304 Trim Flanges as per ANSI b16.5 Class-150 (Drilled) Product Specification : BS-17292/ API-6D Test Pressure Body – 30 Bar (Hyd.) Seat – 22 Bar (Hyd.) Testing Standard : API-598/ 12266-1

Product Image (AV-511)

C.S.S. Investment Casting Ball Valve

Price: 349 INR/Box

One Piece Design, Reduced Bore, Renewable Seat, SS 304 Trim Screwed Female BSP Parallel Threads (BS-21) Test Pressure Body – 1000 Psi g (Hyd.)

Product Image (AV-512)

C.S.S. Investment Casting Ball Valve

One Piece Design, Reduced Bore, Renewable Seat, SS 316 Trim Screwed Female Ends to BSP Threads (BS-21) Test Pressure 1000 Psi g (Hyd.)

Product Image (AV-513)

C.S.S. Investment Casting Ball Valve, Class-800

Three Piece Design, Full Bore, Renewable Seat, SS 304 Trim Screwed Female Ends BSP/BSPT/NPT/ Socket welded ends as per ASME-B16.11 Test Pressure Body – 178 Bar (Hyd.) Seat – 76 Bar (Hyd.)

Product Image (AV-515)

C.C.S. Investment Casting Ball Valve, Class-800

Full Bore, Three Piece Design, Renewable Seat, SS Trim Screwed Female Ends BSP/BSPT/NPT/ Socket welded ends as per ASME B16.11 Test Pressure Body – 178 Bar (Hyd.) Seat – 76 Bar (Hyd.)

Product Image (AV-516)

C.s.s. Investment Casting Ball Valve, Class-150

Three Piece Design, Full Bore, Renewable Seat, SS Trim Flanges as per ASME B16.5 Class 150 (Drilled) Product Standard : BS-17292 Test Pressure Body – 30 Bar (Hyd.) Seat – 22 Bar (Hyd.) Testing Standard : BSEN-12266-1

Product Image (AV-516A)

C.s.s. Investment Casting Ball Valve, Class-150

Two Piece Design, Fire Safe Design, Renewable Seat, SS Trim Flanges as per ASME B16.5 Class 150-(Drilled) Product Standard : API-6D/ EN-17292 Test Pressure Body – 30 Bar (Hyd.) Seat – 22 Bar (Hyd.) Testing Standard : BSEN-12266-1

Product Image (AV-89)

Air Valves

Spring loaded, With soft seat Screwed female BSP parallel threads as per BS 21 Test Pressure Body : 300 Psig (Hyd.) Seat : 150 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-505)

Ball Valves

Two Piece Design, Lever Operated (Blow Out Proof Stem), Renewable Seat Screwed Female BSP Parallel Threads (BS-21) Test Pressure Body – 550 Psi g (Hyd.) Seat – 400 Psi g (Hyd.), 100 Psi g (Steam)

Product Image (AV-96A)

Butterfly Valves

Wafer Type, Without Lugs, Renewable Linear Seat. Suitable for Insertion between Flanges as per ANSI B 16.1 Cl-125, DIN ND-10 & BS-10 Table’E’ Product Standard : IS-13095 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.)

Product Image (AV-27)

Check Valves

Screwed in cover with 13% Cr. Stainless Steel, Renewable Working Parts, Screwed Female Ends Screwed female BSP parallel threads to BS 21 Test Pressure Body : 500 Psig (Hyd.) Seat : 250 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-57)

Gland Cocks

Screwed Female BSP Parallel Threads BS 21 Test Pressure Body – 300 Psi g (Hyd.) Seat – 150 Psi g (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-86)

Foot Valves

Vertical lift, Rubber seat with metallic strainer, Integral seat, Cu-Alloy trim Screwed female NPT threads as per ASME B1.20.1 Test Pressure Body : 435 Psig (Hyd.) Seat : 320 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-103)

GATE VALVES

Screwed in bonnet, Inside screw, Non-Rising stem Flanged ends as per IS 778, Class 1 Product Standard : IS-778 Test Pressure Body : 1.5 MPa (Hyd.) Seat : 1.0 MPa (Hyd.) Max. Working Pressure : 1.0 MPa (Hyd.) Max. Working Temp. : Upto 45°C Testing Standard : IS-778

Product Image (AV-02)

GLOBE VALVES

Screwed on Bonnet, Inside Screw, Rising Stem, S.S. 410 Working Part, Renewable S.S. Trim with Back Seat Arrangement, Handwheel Operated. Flanged ends as per BS-10 Table-F Test Pressure Body : 600 Psig (Hyd.) Seat & Back Seat : 300 Psig (Hyd.) Steam Working Pressure : 150 Psig Testing Standard : BS EN 12266 Part-1

Product Image (AV-264)

Moisture Seprator

Horizontal Type Flanges as per BS-10 Table ‘F’ FF (Undrilled) Test Pressure Body : 300 Psig Hyd. Max. B.O.P. : 150 Psig (Steam) Max. Working Temp. : 220°C

Product Image (AV-30)

Needle Valves

Screwed in bonnet, Inside screw, Rising stem, Integral seat Screwed female BSP parallel threads to BS-21 Test Pressure Body : 300 Psig (Hyd.) Seat : 150 Psig (Hyd.)

Product Image (AV-278)

Blow Off Valve

Bolted Bonnet, Rack and Pinion Operated Flanged Ends as per BS-10 Table ‘J’ FF (Undrilled) Test Pressure Body : 700 Psi g (Hyd.) Max. B.O.P. : 350 Psi g at 400°C

Product Image (AV-222)

Fusible Plug

Two Piece Design Screwed Male BSP Taper Threads BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. Steam working pressure : 250 Psig Max. Working Temp. : 225°C

Product Image (AV-132)

Pressure Reducing Valve

Compact size, Piston type Screwed female BSP threads to BS-21 Test Pressure Max. Working Temp. : 80°C Max. Upstream Pressure : 25 Bar Adjustable Downstream Pressure at Max. Inlet Pressure : Min. : 0.8 bar, Max. : 5.5 Bar Test Pressure : 25kg/cm² g (Hyd.)

Product Image (AV-232)

Safety Valve

Spring Loaded, Open Discharge Inlet Screwed Male BSP Taper Threads BS 21 Test Pressure Body : 500 Psig (Hyd.) Max. B.O.P. : 250 Psig Max. working temp. : 220°C

Product Image (AV-32)

Sight Indicators

Single window with toughened glass & moving impeller Screwed female BSP parallel threads to BS 21 Test Pressure 300 Psig (Hyd.)

Product Image (AV-35)

Stop Valve

Screwed in Bonnet, Inside Screw, Rising Stem, S.S. Trim with backseat arrangement, Handwheel operated. Screwed female BSP parallel threads to BS 21 Test Pressure Body : 500 Psig (Hyd.) Seat : 250 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-14)

Y-Type Strainer

S.S. Screen with 1mm Dia. Perforations, Fine Finish Casting to reduce pressure drop, Screen is guided in the body, Corrosion resistant screen is used, Large ratio clearance between the strainer and body is designed to achieve minimum pressure drop. Screwed female BSP parallel threads to BS 21 Test Pressure Body : 300 Psi g (Hyd.) Max. Working Pressure : 150 Psi g (Hyd.) Testing Standard : BS EN 12266 Part-1

Product Image (AV-17)

Water Level Gauge

Flanged ends as per BS 10 Table F Test Pressure Body : 300 Psig (Hyd.) Max. BOP : 150 Psig at 428°F (220°C) Steam

Product Image (AV-70)

Wheel Valve

Right angle pattern, Screwed in bonnet, Inside screw, Rising stem, Integral Seat, Handwheel Operated. Screwed ends BSP Parallel Threads as per BS 21 Test Pressure Body : 300 Psig (Hyd.) Seat : 200 Psig (Hyd.) Testing Standard : BS EN 12266 Part-1

X